3 thoughts on “How to make a gift box for small stars”
Randy
Step of gift boxes: 1. Paper -cutting This to make a covered carton requires two just square paper, and the paper body is half an inches smaller than the paper cover. The folded carton will be one -third of the original paper. Use the ruler to measure the size and cut the two pieces of packaging paper. 2. Folding the long side . After the two pieces of paper are cut, lay the paper on the opposite side to the desktop, and fold on both sides. , Then use the bone clamp to press the real folding line. Open the paper to rotate 90 degrees and repeat the movement just folded on the other side. 3. Folding angle Next to fold the diagonal opposite, confirm that the two corners are completely matched with the folding line with the bone clamp. Similarly, the four corners must be folded once, and finally the folding line is pressed with a bone clamp. 4. To the center point of the center point The third step will appear on the paper, and then fold four corners to the center point. Correct folding line. 5. Folding the center point of the center point The folding the bottom edge and the top to the center point of the four corners, respectively, turn on the upper and lower sides to rotate the square 90 degrees, and then fold the center point up and down. 6. Complete the shape of the carton . After the above five steps are completed, all the folding work is completed. Next, you must wrap the edge to make the shape of the box. In the two opposite angles, fold the edge of the box along the traces of the folding line, and start from the side. Press the sides with your thumb without folding any new folding lines, as long as you follow the good lines and lines just now to make the edge of the carton. The side of the box is erected according to the folding line, and a triangle will appear on it. Plip the triangle and press it into the carton. Press the corner of the box. In this way, the three sides of the carton are ready. Then repeat the same action to fold the fourth side of the carton. It to ensure that the surface and angle of the carton are firmly fixed, some watering can be used.
A square paper (if possible, use beautiful paper to make the box look better.) The ribbon (or a beautiful rope that can be tied) N takes a piece of square paper twice to form a square. Plipped one side of the square and pressed down with a square side as the middle line. This on the other side of the other side is the same to form a triangle. Then tilt the left corner of the triangle towards the right. The fold back to the edge. mu fold the extra part in. In the right side of the right side to the left to form this shape. Then the same operation is also the same to form this shape. This fold the triangle of the top angle and fold out the traces at the bottom. and then unfold. The side of the side of the two sides is slightly recessed to the middle. and then gather both sides. Paping the front and rear sides with scissors to the middle. and then through the ribbon. In a bow, a simple and beautiful gift box. If Note It because it is used to make gift boxes, the paper should be used to choose beautiful points as much as possible, not too casual paper. Is should be careful when using scissors. It should pay attention to symmetry when folding, so as to be more beautiful. The size of the selected square paper depends on the size of the gift box.
Method 1: Put a little cotton Method two: stack some small handicrafts, such as: stars (can be written in it), small paper crane Method 3: Thousand layer of packaging method (fold many boxes, one set of one set One) Method 4: Put some fragrant dried flowers, grass Method 5: You can buy some small accessories (mobile phone pendants, small plush toys)
Step of gift boxes:
1. Paper -cutting
This to make a covered carton requires two just square paper, and the paper body is half an inches smaller than the paper cover. The folded carton will be one -third of the original paper. Use the ruler to measure the size and cut the two pieces of packaging paper.
2. Folding the long side
. After the two pieces of paper are cut, lay the paper on the opposite side to the desktop, and fold on both sides. , Then use the bone clamp to press the real folding line. Open the paper to rotate 90 degrees and repeat the movement just folded on the other side.
3. Folding angle
Next to fold the diagonal opposite, confirm that the two corners are completely matched with the folding line with the bone clamp. Similarly, the four corners must be folded once, and finally the folding line is pressed with a bone clamp.
4. To the center point of the center point
The third step will appear on the paper, and then fold four corners to the center point. Correct folding line.
5. Folding the center point of the center point
The folding the bottom edge and the top to the center point of the four corners, respectively, turn on the upper and lower sides to rotate the square 90 degrees, and then fold the center point up and down.
6. Complete the shape of the carton
. After the above five steps are completed, all the folding work is completed. Next, you must wrap the edge to make the shape of the box.
In the two opposite angles, fold the edge of the box along the traces of the folding line, and start from the side. Press the sides with your thumb without folding any new folding lines, as long as you follow the good lines and lines just now to make the edge of the carton.
The side of the box is erected according to the folding line, and a triangle will appear on it.
Plip the triangle and press it into the carton. Press the corner of the box. In this way, the three sides of the carton are ready.
Then repeat the same action to fold the fourth side of the carton.
It to ensure that the surface and angle of the carton are firmly fixed, some watering can be used.
A square paper (if possible, use beautiful paper to make the box look better.)
The ribbon (or a beautiful rope that can be tied)
N takes a piece of square paper twice to form a square.
Plipped one side of the square and pressed down with a square side as the middle line.
This on the other side of the other side is the same to form a triangle.
Then tilt the left corner of the triangle towards the right.
The fold back to the edge.
mu fold the extra part in.
In the right side of the right side to the left to form this shape.
Then the same operation is also the same to form this shape.
This fold the triangle of the top angle and fold out the traces at the bottom.
and then unfold.
The side of the side of the two sides is slightly recessed to the middle.
and then gather both sides.
Paping the front and rear sides with scissors to the middle.
and then through the ribbon.
In a bow, a simple and beautiful gift box.
If Note
It because it is used to make gift boxes, the paper should be used to choose beautiful points as much as possible, not too casual paper.
Is should be careful when using scissors.
It should pay attention to symmetry when folding, so as to be more beautiful.
The size of the selected square paper depends on the size of the gift box.
Method 1: Put a little cotton
Method two: stack some small handicrafts, such as: stars (can be written in it), small paper crane
Method 3: Thousand layer of packaging method (fold many boxes, one set of one set One)
Method 4: Put some fragrant dried flowers, grass
Method 5: You can buy some small accessories (mobile phone pendants, small plush toys)